Does more infill make a part stronger?
It can, but orientation, walls, material and geometry often control the useful failure mode more directly.
It can, but orientation, walls, material and geometry often control the useful failure mode more directly.
What to check
Trace the expected load through the part. If a bracket fails at its outside skin or across layer interfaces, extra sparse infill may add weight without fixing the governing weakness. Re-orienting the part, thickening a wall, adding a fillet or placing material around a fastener can be more direct.
Infill still supports top surfaces and can brace shells. Compare candidate patterns and density in the sliced preview, then test representative coupons in the real load direction. The UltiMaker infill documentation distinguishes pattern behaviour and the trade-offs between density, material and print time; it does not make one percentage a universal strength target.