Is a 0.6 mm nozzle worth it?
It can favour wider lines, higher practical flow and particle-filled materials, while giving up some small-feature resolution.
It can favour wider lines, higher practical flow and particle-filled materials, while giving up some small-feature resolution.
What to check
A 0.6 mm bore is attractive for broad functional walls and some filled materials because it supports wider roads and reduces the chance that a large particle bridges the opening. It is a poorer choice when the model relies on tiny text, narrow gaps or fine corners that the wider extrusion cannot resolve.
Confirm that the exact nozzle thread, length, tip geometry and material fit the hotend, then install it by the printer maker's procedure. Select the 0.6 mm printer profile before slicing; changing only the diameter field can leave unsuitable line widths, layer heights and flow limits. Prusa's nozzle guide also warns that abrasive filament calls for a wear-resistant nozzle, so bore size alone is not the buying decision.