Should I use a brass or hardened nozzle?
Use brass for ordinary non-abrasive filament unless the material maker calls for wear resistance; use a compatible hardened nozzle for abrasive fills.
Use brass for ordinary non-abrasive filament unless the material maker calls for wear resistance; use a compatible hardened nozzle for abrasive fills.
What to check
Plain PLA, PETG and similar unfilled filaments normally suit a compatible brass nozzle, whose thermal behaviour is the baseline for many printer profiles. Carbon fibre, glass fibre, glow pigment and metal particles can abrade soft brass; follow the filament maker when it specifies hardened hardware.
A hardened nozzle may need a profile adjustment because material and construction affect heat transfer. Run the maker's temperature and flow checks after fitting it, and re-check first-layer calibration if the machine requires that after nozzle work. The Prusa V6 nozzle overview distinguishes ordinary brass from hardened and speciality choices and stresses compatibility with the hotend.