Why is my first layer not sticking?
Clean and prepare the correct build surface, confirm the sheet and filament profile, then check the first-layer height.
Clean and prepare the correct build surface, confirm the sheet and filament profile, then check the first-layer height.
What to check
Clean the sheet by its maker's method and hold it by the edges. Confirm that the chosen plate and any glue or separation layer suit the filament; PETG can bond too aggressively to surfaces that work conveniently with PLA. Make sure a removable sheet is seated without debris underneath.
Print a one-layer patch at the failing location. Separate round lines mean the nozzle is too far away, while a rough translucent smear or ridges pushed sideways indicate too much compression. Use the printer's documented Z and mesh procedure. Prusa's material table shows that sheet preparation differs by polymer, so more adhesive is not a universal first-layer fix.