Why is my print stringy?
Temperature, retraction, travel, nozzle residue and moisture are common places to investigate.
Temperature, retraction, travel, nozzle residue and moisture are common places to investigate.
What to check
Begin with the filament maker's temperature range and the printer's current profile. If the spool also bubbles, feels rough or suddenly strings after storage, dry it by the maker's instructions before tuning retraction. Clean residue from the nozzle using the hotend procedure and check for molten polymer leaking above the nozzle threads.
Use a two-tower coupon and change nozzle temperature first, then retraction in small steps appropriate to direct-drive or Bowden hardware. Inspect travel moves before enabling aggressive retraction. Prusa's stringing guide prioritises temperature, retraction and nozzle condition; excessive retraction can move softened filament into a cooler zone and cause a blockage.